Record Power SS16V Scroll Saw 16-inch

Product Information

If cost is the driving factor, you may have to live without niceties like dust extraction vacuums and lights. If a foot pedal is crucial, you may sacrifice other features or pay a little extra. All the saws in our comparison guide allow you to perform accurate and stylish cuts on wooden or soft metal materials. The Einhell TC-SS 405 E 120W Scroll Saw is known for its easy operation, safe handling and precision cuts. First off, it is made with a solid base that promotes a stable placement. Stability is very important when precise cuts need to be made. Secondly, the metalwork table is tiltable to 45 degrees and 90 degrees so making those angled cuts and sharp edges is possible. It offers a maximum cutting height of 20mm at 45 degrees while the 90-degree cuts go to a max of 52mm.

The hold down clamp is another nice feature that raises the safety level of this scroll saw, and the level of vibration is so low that you don’t really notice it. There is also a dust extractor but for some strange reason it has been designed to blow towards you while you work so you’ll need to wear a mask if using it. Like any power tool, it’s critically important to approach a scroll carefully saw. The blade won’t move, but the machine could — some users report issues with devices creeping across worktops.Vibration issues were reported with some of our shortlisted products, so it’s best to clamp them in place. Last but not least, the Record Power SS16V Scroll Saw 16-inch comes with a 5-year warranty and that tells you that the manufacturer has enough confidence in the quality of this tool. Specification Basic scroll saws have fixed rectangular or circular tables, supporting a cutting depth of up to 50mm. More sophisticated models allow the table to tilt at 45 degrees for bevel cuts and fine detailing. The cheapest scroll saw in our list is this Einhell TC-SS model and it’s a genuine bargain as far as I am concerned.The biggest fault I found with this model is that when changing the blades, you need to remove the side panel to reach the bottom clamp. And while this can be done without the use of tools, it is still annoying, not to mention potentially dangerous as this is where the motor shaft can be found spinning. This scroll saw boasts a solid construction with a die-cast aluminium table and an extremely lightweight magnesium saw arm. It has arguably the largest working table on the market currently and it also has a wider angle adjustment in comparison to other scroll saws. The scroll saw can cut several kinds of materials and even its cutting depth is far more superior when compared to other models. It also has an easy blade change system and the featured dust blowing function ensures a clean work surface. Unpinned or Pinless Blade Attachments: Pinless blades are widely preferred because they are thinner. Hence, they are less exposed to snapping during tight turns. Also, they are not difficult to thread into drill holes when you want to engage in inside cutting. To make a scroll saw blade work at its optimum level, you need to have the tension of the blade set right. A blade that is either too loose or too tight will have different, but equally negative effects. If you’re not experienced at this, I would suggest getting a model that has an easy blade tensioning set up. The Scheppach SD 1600F Decoflex Scrollsaw is a solid tool for scrolling but what makes it interesting is the way it transforms to perform other handy tasks. Aside from that, it does have some crucial features that you need in a scroll saw.

As an added bonus the FERM scroll saw comes with 10 blades to get started with. I think this is great for beginners as it is easy to break blades through excess pressure when first starting out.

Scroll Saw Blade Basics

When using a scroll saw it is important to be able to see what you are doing, and that is why most models have integrated work lights. This one is no different and is mounted on a flexible rod so it is easier to find the right angle to illuminate your work and keep those cuts accurate.

What’s more, an adjustable light illuminates the working area, making it easier for you to achieve the best result. The table tilts from 0 to 45 degrees, making it possible for you to cut bevels. This variable speed scroll saw uses both plain end and pin end blades for optimum versatility. Think about the types of jobs that you will be using the saw for and how big the pieces of wood that you’ll want to use on it, and that will give you a better idea of how big you need the cutting table to be. Also, bear in mind that you’ll have to spin the wood around as you cut it so you need enough room in all directions. A look at the size of a table on a scroll saw Blade tensioning and changing The clamp is also a good feature for holding your tool firmly in place. Furthermore, this scroll saw performs as a stationary and handheld tool so you’ll have enough freedom to work about anywhere. Dust disposal is also possible thanks to the vacuum cleaner nozzle.

Scroll Saws Explained

That’s not all; the tool comes with a set of different accessories that will enable you to transform your carving ideas into reality. The Scheppach Sd 1600F Decoflex Scrollsaw comes with adapters for pinless blade clamping. In the event that you usually spend some time fixing the blades in the adapters in advance and put them into special groovings, you will dependably have them at hand and will have the capacity to change them in a matter of seconds.