15mm White SPEEDFIT Collet Locking Clip - CM1815W - Pack of 10

Product Information

Other things you can do to improve performance include having the shortest bowden tube possible, while keeping bend radius no less than around 150mm. In the original incarnations of 3D printer extrusion systems the motor, gearing, filament drive and HotEnd were all built together in a single assembly. The extruder (motor, gearing, and filament drive) thus fed filament directly into the HotEnd. Those of you who've seen our new Gold V6 will have seen the swanky new Capricorn PTFE tubing and collet clips that it comes with. This blog post goes into more detail on the need for these upgrades, and how they work. TL;DR:

More lag/lash/hystersis/slop/whatever you want to call it. The extrusion system is simply not going to be as responsive as a direct extrusion system You just need to increase retraction and your bowden system will be as precise as a direct extruder" The push-fit solutions can also be found in water purification systems. These food grade fittings have been designed specifically for fluid control and drinks dispensers meaning that when using water systems in offices and other public places, water is safe to drink, while systems are easy to maintain and repair.Ensure the pipe is free of score marks. Cut the pipe square. When using Speedfit Barrier Pipe cut along an insertion mark. We recommend the use of JG Pipe Cutters. To prevent damage to the ‘O’ ring remove all burrs and sharp edges. Initially push-fit fittings were being used for fuel systems and now they are an essential part involved with low-pressure power steering systems and aiding the development of greener engines. The amount of “stuff” on the print-head is much lower, and takes up less space. This can mean a smaller print head, a larger usable print volume, more extruders on one print head, or any combination of these factors.

Collet covers for use with standard Speedfit fittings, are available in white or in red or blue to allow colour coding of pipes. In the 1980s the first ever fibre optic push-fit fitting was developed by John Guest in collaboration with BT. Such fittings are now commonplace, with over 2.5 million being produced every year for delivering high speed internet to millions of homes and offices. We have a new high-performance bowden tube , and ways of making our tube couplings grip the tube more securely using a pre-tensioning clip . These will make your bowden system more responsive and reliable. Read on to find out how. What is a bowden system?Push the pipe into the fitting, up to the pipe stop. If the Speedfit Pipe has been cut correctly the insertion mark on the pipe will be level with the collet head. The ‘O’ ring on the Superseal Pipe Insert provides a secondary seal against the bore of the fitting. A good connection has been made. The stem of the insert gives greater rigidity of the length of pipe within the fitting, reducing the chance of leaks if a side load is applied. White or grey collet clips are used with standard fittings to prevent accidental pipe disconnection.

Bowden systems improve print quality because the resistance of the spool to unwinding no longer tugs on the print-head as it moves around"You just have to make sure that you don’t use poor-quality filament with an uneven diameter, which these days is far less of a concern than when we originally introduced bowden versions of E3D HotEnds. The spool weight myth is countered because you get the same no-drag effect with a direct extruder by running a guide tube from the spool holder to the extruder in the normal way, thus keeping a constant filament length between extruder and spool independent of carriage position. Retractions try to counter this by “pre-pumping” at the start of extrusion and relieving pressure at the end of extrusion. The more nuanced pressure advance algorithms do a conceptually similar thing, but are continuously compensating during acceleration and deceleration. Whatever control method you use, it is not possible to gain control authority over a system that is inherently less responsive. You can compensate for the errors to an extent, but you can’t eliminate them. Your extruder has a finite amount of speed and acceleration which it can use for compensating. By diving a little deeper into the physics of where the downsides to a bowden system really come from, we can begin to understand how to improve these systems by minimising the negative effects. What needs fixing?

Your extruder system has a finite amount of pushing force. You want as much as possible of that pushing force to be used to generate pressure in your HotEnd, as it’s what causes the molten filament to actually extrude from the print-head (pretty crucial to 3D printing!). Speedfit Fittings have a unique grip then seal construction made up of a collet with stainless steel teeth to grip the pipe and an ‘O’ ring to provide a permanent leak proof seal. Use of the Superseal Pipe Insert ensures a double ‘O’ ring seal.To increase the stiffness of the filament spring we are introducing Capricorn PTFE Tubing; a new, higher tolerance tube, with a tighter 1.9mm internal diameter and added internal lubricant. This has a twofold benefit - it reduces sliding friction of the filament in the tube, but most importantly it makes the filament 'spring' stiffer, by quite a lot. The tighter internal diameter permits the filament to have far less flexion than in our standard 2mm ID tubing, meaning that it can't bunch or coil up. This really firms up the response of the whole bowden system. Because the filament has no space in which to bend within the tube, movement produced by the extruder is much more efficiently translated down the tube, into the HotEnd, and out the other side. An ‘O’ ring at the head of the insert and the shape of the stem, provide a secondary seal against the bore of the fitting. A combination of this and the main ‘O’ ring ensure a good connection.