HP J9729A Managed Ethernet Network Switch

Product Information

Table 46: ( ArubaOS-CX)Compatibility for the SFP⁠+ DACs (and specifics for HPE Server cables) Product name For J8705A and J8706A modules: K.12.01 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007 For use in the JL075A SFP⁠+ ports. Also used in an installed JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module.

At Intelligent Servers, we supply refurbished HP Aruba 2920 switches with a three year warranty included as standard and free remote support for the duration. All our products are also offered with free delivery worldwide. For the J9308A module: K.14.34 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007 J8992A fixed SFP ports are 1GB and do not support these SFP⁠+ copper cables. For use in an installed J9312A 10GbE 2-port SFP⁠+/2-port CX4 yl Module. For J8692A, J8693A: K.12.01 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483, and J9054D 1990-4483 and 1990-4360) The 8325 requires configuration of "interface groups" to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See the

Key specs

J9772A, J9773A, J9774A, J9775A, J9776A, J9777A, J9778A, J9779A, J9780A, J9781A, J9782A, J9783A, J9853A, J9854A, J9855A, J9856A

For J9310A, J9311A: K.14.50 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483, and J9054D) For J9451A: K.14.24 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007 Is it broken, do you think, or perhaps a firmware or config issue? The switch is on the latest version.

Create an account on the HP Community to personalize your profile and ask a question

These switches only allow original SFP+ modules, unless you use the allow unsupported transceivers which voids warranty. Wondering if someone can help please. I've had a 2920 switch for a while but only just getting round to connecting 10GbE to our main Mellanox switch. Strange behaviour with the module showing in the CLI commands but not via the menu, see below. Any attempts to plug in copper cables or fibre modules all result in flashing amber light on either port and the port doesn't go 'up'. ER (J9153A/D) transceivers are limited to a maximum of two transceivers per J9309A or J9538A modules when used in a 5400zl or 8200zl chassis. For use in the SFP ports of the J9263A 6600-24G Switch, the J9264A 6600-24G-4XG Switch, and the J9451A 6600-48G Switch

For use in the SFP ports of the 2530 Series Switches. (The J9853A, J9854A, J9855A, and J9856A models have 1G/10G SFP⁠+ ports that do not support these 100Mbps transceiver modules.) The 8325 requires configuration of "interface groups" (groups of 12 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See theTable 45: (ArubaOS-Switch) Compatibility for the SFP⁠+ DACs (and specifics for HPE Server cables) Product name Only supported for use in the SFP⁠+ ports on R0X43A module. 100FX is not supported for use in the R0X44A SFP28 or SFP56 ports of any other 6400 module.