Alto Truesonic TS310 2000-Watt 2-Way Active Loudspeaker - 10 Inch

Product Information

It’s evident that the Alto TS310 is designed by its manufacturer with professionals in mind. Also, it’s quite clear that the speaker is meant to be used at larger venues and with bigger crowds. Because it can be mounted on a pole, obtaining the setup best suited for the event is made easy.

Combining powerful, fantastic audio quality with an elegant and lightweight yet rugged and versatile cabinet along with a useful, intuitive user interface - designed and tuned in the USA; the Alto TS310 active speaker impresses on all fronts. A host of useful features maximise the efficiency and audio performance of the TS310, taking it above and beyond expectations. Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m) Frequency Response: 54–20 kHz (+/- 3 dB)

Rating

Dual input. Because of the presence of two input options, up to a couple of microphones as well as other audio sources can be used with the Alto TS310. As if that’s not enough, there are also two-channel mixers, level controls and contour equalizer switch around.

Buy the Alto TS310from PMT Online for incredible power from an extremely versatile and portable active loudspeaker. Alto Truesonic TS310 Specifications: Using the contour EQ switch you can get the perfect sound to suit your tastes while the ground-lift switch allows you to remove the buzz and hum interference from other devices and the venue’s electronics. Easily Portable with Versatile Setup Options Experts and consumers alike consider the TS310 by Alto Professional as a small but terrible speaker. That’s because it is compact in size but big in performance, surpassing the capabilities of some larger speakers in the market. Let’s take a look at some of the key features of the product: Crisp and clear high-end is taken care of by a 1.4” neodymium magnet HF driver that utilises a precision wave guide. Great Features

Tech spec

As is usual for this type of speaker, the TX310 is a ported, bi‑amplified two‑way system, in this case pairing its long‑excursion woofer with a 1.5‑inch voice coil alongside a one‑inch titanium compression driver tweeter, crossing over at 2.5kHz. The tweeter is loaded by a full‑width horn, producing a horizontal dispersion of 90 degrees and a vertical dispersion of 60 degrees. Power comes from Class‑D amplifiers rated at 350 Watts peak or 175 Watts continuous, and the overall system has a specified frequency response of 75Hz to 20kHz at the ‑3dB points. Protection is provided by a built‑in analogue limiter and additional thermal overload protection circuitry. Two LEDs indicate power and the presence of signal/clipping, while a rotary control adjusts the input gain, which offers enough range to cater to both line‑level and mic‑level sources. There’s also a power LED on the front panel. The maximum SPL for a single speaker is specified as 117dB at a distance of one metre, which although not massive, should be adequate for many types of small venue applications including solo artists, duos and bands without loud drum kits. The speakers are suitable for both vocals and instruments such as guitar, though you’d need the larger models and/or an additional subwoofer if planning to put bass or drums through the PA. With a little mixer EQ you can get a very workable vocal sound out of these speakers, and a pair will provide adequate volume for smaller venues... Using newly-designed transducers along with custom engineered, highly efficient class D amplifiers, the Alto TS310 delivers a hefty peak 2000 watts with a solid 1000 watts continuous RMS. Deliveries will be made subject to the terms and conditions of the courier company. djkit.com will not be held responsible for late deliveries. Tapping on the case reveals some panel resonances, which is not uncommon with moulded speaker enclosures, and this is most likely a contributing factor to the lower‑midrange sound coloration I heard when playing full‑range material through the TX310. I got the impression that the speaker had been voiced to give a good account of the low end and to deliver a crisp treble, but at the expense of some midrange clarity. Some low‑mid cut centred around 200Hz cleaned this up to a useful degree, especially in a vocal PA setting, as it helped tame some of that unwanted boxiness. There’s also a useful amount of mic gain if you plug a mic directly into the XLR input, which is always good to know for those ‘broken mixer’ emergencies or for basic announcement work, though there’s no opportunity to add EQ or effects if you work that way.

Small and lightweight. Other than impressing with its performance, the Alto TS310 is also designed to amaze with its compact body. The product’s casing measures 20.6 x 11.8 x 12.6 inches only, and it tips the scale at just a little over 30 pounds. Yes, it may not be the smallest and most lightweight option, but it is certainly easier to carry and transport than most other professional speakers. The all-new Alto Professional TS3 Series of professional loudspeakers deliver solutions for every performance and installation challenge. With 2000 watts of explosive bi-amplified power and newly-designed transducers, these speaker systems deliver truly high-performance audio, without compromise or restriction. Their elegant industrial design, lightweight but rugged construction, versatile mounting/placement application and intuitive user interface achieves a level of excellence and refinement that exceeds expectations. Punchy bass. Enjoying a lot of bass is trouble-free for as long as the one on the stage is the Alto TS310. That’s because it has a massive 10-inch driver designed to ensure that there’s never a shortage of bass during the performance. The presence of a neodymium magnet with precision waveguide makes for punchier bass.The cabinet design has a high quality, solid build and is lightweight so it’s easy to carry, transport, set up and install. The Alto TS310 is also intended for those who refuse to be weighed down by bulky and hefty audio equipment when going from one venue to the next. The powerful 10-inch driver of the speaker is housed inside a compact cabinet that can be transported trouble-free as it weighs just a little over 30 pounds. What Customers are Saying Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF) LF Driver: 10-inch (254 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil There are a couple of things about the Alto TS310 that a lot of customers love. First, it is capable of producing loud and clear sound, courtesy of its powerful amplifier. What’s more, many people agree that the bass is deep and punchy. Second, the TS310 carries a price tag that’s reasonable enough. However, some consumers note that the cabinet seems to be insubstantial as it tends to rattle especially when there’s a lot of bass. The Bottom Line

Thanks to the lightweight and rugged design, the Alto TS310 is easy to transport and set up. The high-efficiency class D amps with passive cooling design ensure the speaker runs cleaner, quieter and has better long-term reliability. The Alto TS310 offers flexible mounting/placement application allowing it to be attached to poles, walls and ceilings. The TS310 is the ideal loudspeaker for users looking for a powerful, reliable PA speaker without the big investment.The Alto Professional TS3 is a brand new series of speakers that deliver a clear yet explosive sound and is a great audio solution for any style of music. The TS310 features a bi-amplified design that gives you high-quality audio without any restrictions or compromises and is suitable for a range of applications including mobile entertainers, schools and colleges, live events, music venues, club and bar venues, and theatres.