FCHO Floor Gap Fixer Tool for Laminate Floor Gap Repair Include Suction Cup and Mallet (Can't use on Scraped Surface Floor)

Product Information

In our case, all of the floor gaps coincide with the main HVAC duct that runs just below the subfloor. This run of flooring must get even hotter and drier in the winter than anywhere else in the house. Over time, gaps might appear between planks due to fluctuations in temperature. Floor gap repair can be achieved with Fix-A-Floor Adhesive. Keep your vacuum and a damp cloth handy during the repairs, too, so that you can clean up any newly exposed debris as you work to maintain a clean workspace and a better repair. 3 Ways to Remove Gaps in Laminate Flooring

There are three main ways to remove gaps from laminate flooring. Each has its pros and cons, so research your options carefully before you choose the one that is right for your flooring and situation.

CUSTOMERS LOVE US

Tape the plank edges that surround the area you will be caulking. This will prevent the floor planks from being stained. Our superior laminate floor injection kit is more than capable of working with thin gaps, thanks to the precision kits and 60ml syringe included, which gives you everything you could possibly need to complete the job. Works on textured Floors} Plank Grabber’s Patent Pending floor gap fixer tool is suited for both smooth or textured floating floorboards, (not glued or nailed). For a permanent fix use Floor-Fix Pro adhesive before closing the gaps.

Slightly damp the surface of the displaced plank; will give you a better grip with the floor gap fixer. Do not wet it too much. You need your flooring to be as clean as possible before you begin repairs. Since gaps usually collect dirt and debris, be sure all gaps are clear of foreign materials before and during the repairs, or you can end up leaving room for more gapping problems in the future. Plank Grabber is capable of dragging a train of 4-5 planks along at the same time. Just add a bit of weight to the top of it when you are tapping. The next step in laminate floor repair where you have creaky or moving floorboards is to drill some small holes in your laminate floor in the affected area.You might want to avoid walking on or near the impacted area for a day or so while the glue fully cures. Be on the lookout for any extra glue that might get pushed out of the gap area; if you see any, scrape it off and clean up any remaining residue as soon as you notice it. Additionally, sometimes you will need a second application of glue to fill the gap fully, so periodically inspect the area for any recurrence of the gap. Using a Gap Fixer for End Gaps Avoid using abrasive tools on your laminate floor. They can damage the flooring coat. Heavy tools can also end up displacing or damaging the planks. Additionally, don’t use acidic cleaners.

I sanded one side of my DIY floor gap fixer with 150 grit sandpaper so the tape would get a good grip on it. To clean or not to clean before using the DIY floor gap fixer?Simply place Plan Grabber on the plank you want to move. Press down firmly and tap with a rubber mallet. From water damage to minor repairs, this guide will help you set your budget What to Do If Your Laminate Floor Starts Gapping